Skip to content
Variety Engines
S6-S650F Remanufactured Manual Trans for Ford 2003 F-series 7.3L, 6 Speed
Ford

S6-S650F Remanufactured 6-Speed Manual Transmission for 2003 Ford F-Series 7.3L

SKU 12630TCondition Remanufactured
$4,899.00$5,649.00SAVE 13%

In stock — ships in 1–2 business days

S6-S650F manual transmission for Ford 2003 F-series 7.3L, 6 Speed. Listed with zf built, front and rear cases and integral bell housing. Match the Hollander number (400-00662). Drive type isn't stated on this unit — send your VIN and we'll confirm before it ships.

Call with your VIN or tag number and we will confirm this listing fits before you pay.

Shipping
Freight, 3–6 business days
Returns
45 days, by mail
Payment
Bank transfer, Zelle, Chime

Specifications

Product Type
Transmissions
Application Notes
S6-650; ZF Built, Front And Rear Cases, Integral Bell Housing, 5:79 Low-0:72 Gear Ratio, 34 Spline Output Shaft, High Torque, ID: 1319-050-049, 2C34-KA, 2C3Z-KARM, Hollander Number: 400-00662
Model Number
S6-S650F

Product details

A 34-spline output shaft and a high-torque designation are what the notes single out on this S6-S650F, listed for the 2003 Ford F-series 7.3L in six-speed form. ZF built it, and the record shows front and rear cases with an integral bell housing and a 5:79 Low-0:72 gear spread. Matching numbers are ID 1319-050-049 plus 2C34-KA and 2C3Z-KARM, under Hollander 400-00662. Drive type is not stated on this listing, so send your VIN and it can be confirmed before shipping.

Application notes

S6-650; ZF Built, Front And Rear Cases, Integral Bell Housing, 5:79 Low-0:72 Gear Ratio, 34 Spline Output Shaft, High Torque, ID: 1319-050-049, 2C34-KA, 2C3Z-KARM, Hollander Number: 400-00662.

Every transmission carries a 6-month limited warranty as standard, with a 7-year / 1,000,000-mile extended warranty and a core-fee waiver available on request for qualifying remanufactured units. Every transmission undergoes the same rigorous remanufacturing process:
  1. Teardown and Triple Clean – Every transmission is disassembled, inspected, and cleaned three times. We also chase all threads and install all new bushings during this process.
  2. New or Re-machined Parts – Gear wear is checked and worn gears are replaced. Mainshaft straightness is tested and replaced if needed. Clutch disc synchronizers, selector fork, and flywheel are re-machined or replaced as needed.
  3. Dyno Testing – Our custom dyno testing machines spin and load test every transmission to verify it’s ready for the road.
When you buy a remanufactured transmission from Variety Engines, you’re buying a transmission that meets or exceeds OEM specifications. A 7-year / 1,000,000-mile extended warranty is available on request for qualifying units.

Full details: our remanufacturing process and warranty terms. As an exchange unit a refundable core charge may apply.

Call 216-250-6666 with your VIN or tag number and we will confirm this listing fits. More Manual.

Equipment brands we stock

Browse shop equipment