−20%Added to cart
View cart
Chrysler
Remanufactured 2013-2017 Dodge & Chrysler Car 5.7L HEMI V8 Engine, EZH
SKU 12701ECondition Remanufactured
$3,999.00$4,499.00SAVE 11%
In stock — ships in 1–2 business days
5.7L V8 OHV 16-valve remanufactured engine for 2013–2017 Dodge,Chrysler Cars Hemi EZH V8. Block castings 53021319DK and 53021318DL and crank casting 300BC WITH DENT. Fully remanufactured to meet or exceed OE specifications. 7 year, million mile warranty and core fee waiver available.
Call with your VIN or tag number and we will confirm this listing fits before you pay.
- Shipping
- Freight, 3–6 business days
- Returns
- 45 days, by mail
- Warranty
- See warranty terms
- Payment
- Bank transfer, Zelle, Chime
Specifications
- Vendor Sku
- DDM22
- Important Notes
- With M.D.S. and V.V.T.
- Block Casting
- 53021319DK, 53021318DL
- Crank Casting
- 300BC WITH DENT
- Product Type
- Engines
- Displacement
- 5.7L
- Number Of Cylinders
- 8
- Block Type
- V
- Head Type
- OHV
- Number Of Valves
- 16
Product details
2013-2015 Chrysler Dodge Jeep 5.7L EZH V8. With M.D.S. and V.V.T.. VIN Code . With M.D.S. And With V.V.T. 4 Solenoids (298aa/Long) In Valley. No E.G.R. Cam# 372aa @ Rear End Of Cam. Crank Reluctor Wheel 58t, Trigger Width 3.3mm.
Casting Numbers :
-
block Casting 53021319DK, 53021318DL
-
right Head Casting 53021616DD/DE
-
left Head Casting 53021616DD/DE
-
crank Casting 300BC WITH DENT
This Fits the following applications:
- 2013-2017 Dodge Challenger 5.7 Automatic Trans
- 2013-2017 Dodge Charger 5.7
- 2013-2017 Dodge Durango 5.7
- 2013-2017 Jeep Grand Cherokee 5.7
- 2013-2017 Chrysler 300 5.7
***** Upgrade to a NEW OEM engine at checkout see options below*****
Features included:
- Industry Leading In-Process Machining, In-Process Testing and Monitoring
- Assembled with Manufacturing Execution System for continuous monitoring and recording of all torque and in process inspection results
- 100% Spin Tested to ensure correct compression, oil pressure, flow, and torque to turn
- Variable camshaft phaser testing (VVT) and Active Fuel Management (MDS) solenoid testing where applicable
- 100% lifter bore diameter inspection to help ensure OE level lifter to lifter bore clearance and ensure minimal valve train noise
- 100% inspection of piston clearance to allow for tighter piston-to-bore clearance to prevent piston slap and oil consumption
- Cylinder heads are 100% pressure tested after installation to identify cracks or sealing issues
- CNC cut valve seats for improved sealing and run-out, allowing for longer valve and seat life o Seat replacement on early style heads to ensure retention
- Use of High Integrity Components
- Use of chromed valves to prevent valve guide wear and oil consumption by improving durability and reducing friction
- Use of PTFE front and real seals for improved sealing
- Use of FKM Positive Sealing valve stem seals for appropriate valve stem oiling
- Hypereutectic pistons used to decrease distance between ring grooves, improving piston ring sealing
- 100% use of PTFE coated pistons to prevent scuffing and wear
- Use of high quality, Multi-Layered Steel (MLS) gaskets to allow for higher cylinder temperatures and pressures
- Use of ALL NEW rod and head bolts to reduce potential fatigue and ensure long engine life
- Use of improved piston rings over OE design to allow for improved oil control and durability
- Deep Clean – To start the remanufacturing process, every engine is fully disassembled and hot tanked (cast iron) or thermally cleaned (aluminum)
- Inspection – Magnaflux testing uses magnetic particles to inspect metal, checking for microscopic cracks and fissures that will cause long-term failure. All parts are visually inspected as well.
- Machining and New Parts – Deck surfaces are CNC machined and new parts are added. New parts include bearings, pistons, rings, lifters, oil pump, gaskets, Viton™ valve seals, freeze plugs, galley plugs and either a new timing chain (with new tensioners) or a new timing belt (with new tensioner). If an engine has a timing-driven water pump, a new pump is installed.
- SIM Testing – Each engine is SIM tested after reassembly, with the cooling and oil systems being fully pressurized and the crank being spun at high RPM to verify compression and build quality.



