Skip to content
Variety Engines
Remanufactured Dana 50 IFS Front Carrier Assembly for 1983-1997 Ford F250/F350 3.54 Ratio
Ford

Remanufactured 1983-1997 Ford F250/F350 Front Differential – Dana 50 IFS Carrier Assembly, 3.54 Ratio

SKU 17848DCondition Remanufactured
$1,499.00$1,699.99SAVE 12%

In stock — ships in 1–2 business days

Dana 50 front carrier assembly for 1983–1997 Ford F250/F350 3.54 Ratio. 3.54 gear ratio and 9 in ring gear. Your replacement ratio must match the axle at the other end of the vehicle — check the ratio tag before ordering.
Call 216-250-6666

Call with your VIN or tag number and we will confirm this listing fits before you pay.

Shipping
Freight, 3–6 business days
Returns
45 days, by mail
Payment
Bank transfer, Zelle, Chime

Specifications

Axle Family
Dana 50
Vendor Sku
RAA440-1283A
Gear Ratio
3.54
Ring Gear Diameter
9
Product Type
Differentials

Product details

The axle is held in the carrier with a C-clip on this Dana 50 unit, which is one of the details to check against the housing you are replacing. It is listed at 3.54 with a 9.0 inch ring gear, described as IFS, and covers 1983-1997 Ford F250/F350. The vendor SKU is RAA440-1283A. As with any carrier swap, the ratio here has to agree with the one stamped on the tag at the other end of the truck.

Application notes

Ratio: 3.54; Dana 50, 9.0 Inch Ring Gear, IFS, Axle Held In Carrier With C-Clip.

Every differential and axle assembly we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:
  • Deep Clean – To start the remanufacturing process, each unit is fully disassembled and cleaned.
  • Inspection – The ring and pinion, internal gears, clutches and carriers are carefully inspected. Gears are checked for proper tooth contact, and axle tubes are inspected for straightness.
  • New Components – All seals and bearings are replaced, and gears are reset for correct rolling torque for maximum efficiency and performance. Backlash is reset carefully for maximum longevity and quiet operation.
  • Validation – After reassembly, each unit is spin tested as part of a detailed checklist validation process.
Every differential and axle assembly carries a 6-month limited warranty as standard. A 7-year / 1,000,000-mile extended warranty and a core-fee waiver are available on request for qualifying remanufactured units — ask us before you order and we will confirm eligibility.

Full details: our remanufacturing process and warranty terms. As an exchange unit a refundable core charge may apply.

Call 216-250-6666 with your VIN or tag number and we will confirm this listing fits. More Dana 50.

Related products

Equipment brands we stock

Browse shop equipment