Leon

Leon supplies new wheels here, all of them listed under the Leon Hardiritt name and filed in Brand New Wheels. Seven models are listed. Each title carries the diameter and width, the offset and the disk type, and that is the information we hold. We do not publish material, load rating, finish options or centre bore for these wheels, so treat the title as the spec.

What we stock

Two 16 inch models are listed, both 16×5.5. The Gemut is offset +32 with a standard disk. The Bugel is a reverse rim wheel with a standard disk inset, listed as 16×5.5 ET35 with bolt patterns 4×98 and 4×100. The Bugel is the only wheel here with a bolt pattern recorded on the listing.

At 18 inches the Orden is 18×10.0, offset +19, low disk. At 19 inches there are two 19×10.0 models with high disks, the Welle at offset -31 and the Glaube at offset -33. At 20 inches the Stein is 20×10.0, offset -33, high disk, and the LF-S1 is a forged concave wheel, 20×10.0, offset +6, listed as hi disk. The LF-S1 is the highest priced model in the range and the two 16 inch wheels the lowest.

Buying and support

Offset is what decides whether these fit. Five of the seven are 10.0 inches wide and several run negative offset, so measure your clearance before ordering rather than assuming a wheel that suits one car will suit another in the same size. Because only the Bugel lists a bolt pattern, call us with your vehicle and we will confirm what the supplier holds for the model you want before anything is ordered.

These are new wheels and carry the manufacturer’s warranty. The extended warranty and core arrangements offered on qualifying remanufactured drivetrain units do not apply to wheels, and there is no core charge on a wheel. Ask about availability and lead time when you call, since that varies by model. Payment is by bank transfer or check. Reach us on 216-250-6666 or at sales@varietyengines.com.