Atlas PV12PX Commercial Grade Overhead 12,000 lb. Capacity 2-Post Lift
$8,250.00
The Atlas PV12PX is a 12,000-lb. overhead two-post car lift. Confirm your ceiling height, floor and power supply before ordering — we ship by freight and can check the install with you.
In Stock
Description
Features and Benefits:
- 12,000 lb capacity
- Extra Tall & Extra Wide
- Commercial Grade
- Adjustable height 165 IN (13 FT 9 IN) or 177 IN (14 FT 9 IN)
- Special low height 150 IN (12 FT 6 IN) (REQUIRES PURCHASE OF ADDITIONAL CABLES)
- Symmetric arms
- Automatic Arm Restraints
- “Padded” Shut-Off Bar
- Door Guards on Carriages
- Single Point Lock Release
- Dual Direct-Drive Cylinders
- Powder Coat Finish
- Free 12 Piece Truck Adapter Set
- Mounting Hardware Included
- Shipping weight: 2,160 lbs.
- 5 yr Structural ‐ 2 yr Hydraulic Warranty ‐ Parts Only
- This part number FREIGHT PREPAID
Atlas® ATTD-PV12PX Specifications
- Capacity 12,000 LB.
- Overall Height 165″ (13′ 9”) or 177” (14′ 9”)
- Special Low Height 150″ (12′ 6”) (REQUIRES PURCHASE OF EXTRA CABLES)
- Overall Floor Width 153″ (12′ 6 3/8”)
- Outside Column to Outside Column 139 1/8″ (11′ 7 1/8″)
- Maximum Lift Height (Without Adapters) 72 1/4″
- Maximum Lift Height (With Adapters) 81″
- Minimum Arm Height 4 1/2″
- Inside Column 123” (10′ 3”)
- Drive Thru 109″ (9′ 1”)
- Column Size 7 1/2″ x 14 1/2″
- Column Thickness of Steel 6mm
- Base Of Lift 17 1/2″ x 20 1/2″
- Motor/Electrical Requirement 220 volt single (1) phase. (A 30 amp breaker is recommended)
- Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED)
- Shipping Weight 2,160 LBS.
- Adapter Heights 4 Each 1.25”, 2.5”, 4”
- Arm Hole/Adapter Peg Size 1.5”
- Requires a minimum of 6″ of concrete with a 3000 psi. rating
Call 216-250-6666 or email sales@varietyengines.com with your ceiling height, floor and power supply and we will check the install and freight with you before you order. More Two Post Lifts.


















