Vendor SKU

DCEW

Block Casting

2995, 2782, 0428.

Crank Casting

183

Product Type

Engines

Displacement

2.4L

Number of Cylinders

Block Type

2011-2017 Chevy, GMC 2.4L Remanufactured Engine – Federal Emissions

2.4L L4 engine assembly for 2011–2017 Chevy,GMC Federal Emmissions. Block castings 2995, 2782 and 0428. and crank casting 183. Fully remanufactured to meet or exceed OE specifications. 7 year, million mile warranty and core fee waiver available.

In Stock

Description

2011-2017 Chevrolet Buick GMC Ecotec 2.4L L4. Vin Code K Federal Emissions Only with no smog holes by exhaust manifold

This Engine comes with the following components:

Engine Long Block With Head installed
Oil Pan
Timing Cover
Valve Cover
Finishing Gaskets

Engine Assembly Numbers:

LEA
MH7
MHC
NT7
NU5

This engine Fits the following Vehicles:

2011-2017 GMC Terrain C Federal Emission Vehicle only No Smog Holes 2.4L Engine
2012-2015 Chevrolet Captiva Sport K Federal Emission Vehicle only No Smog Holes 2.4L Engine
2012-2017 Buick Verano K Federal Emission Vehicle only No Smog Holes 2.4L Engine
2011-2016 Buick Lacrosse C Federal Emission Vehicle only No Smog Holes 2.4L Engine
2011-2012 Buick Regal R Federal Emission Vehicle only No Smog Holes 2.4L Engine
2012-2017 Buick Regal C Federal Emission Vehicle only No Smog Holes 2.4L Engine
2011-2017Chevrolet Equinox C Federal Emission Vehicle only No Smog Holes 2.4L Engine
2012-2014 Chevrolet Orlando M Federal Emission Vehicle only No Smog Holes 2.4L Engine
2013-2014 Chevrolet Malibu R Federal Emission Vehicle only No Smog Holes 2.4L Engine
2014 Chevrolet Impala R Federal Emission Vehicle only No Smog Holes 2.4L Engine

Engine Installation Warning :

Warning these engines are prone to failure due to the catalytic converters clogging up which overheat the engine damaging the head gasket amongst other things. Failures involving overheat are not covered under the warranty so please be sure your mechanic has diagnosed why your original engine failed properly. In the event the cause was overheating it is likely because of this and the catalytic converter should be replaced.

Every engine we sell is fully remanufactured to meet or exceed OEM specifications:

Deep Clean – To start the remanufacturing process, every engine is fully disassembled and hot tanked (cast iron) or thermally cleaned (aluminum)
Inspection – Magnaflux testing uses magnetic particles to inspect metal, checking for microscopic cracks and fissures that will cause long-term failure. All parts are visually inspected as well.
Machining and New Parts – Deck surfaces are CNC machined and new parts are added. New parts include bearings, pistons, rings, lifters, oil pump, gaskets, Viton™ valve seals, freeze plugs, galley plugs and either a new timing chain (with new tensioners) or a new timing belt (with new tensioner). If an engine has a timing-driven water pump, a new pump is installed.
SIM Testing – Each engine is SIM tested after reassembly, with the cooling and oil systems being fully pressurized and the crank being spun at high RPM to verify compression and build quality.

Every engine carries a 6-month limited warranty as standard. A 7-year / 1,000,000-mile extended warranty and a core-fee waiver are available on request for qualifying remanufactured units — ask us before you order and we will confirm eligibility.

Full details: our remanufacturing process and warranty terms. As an exchange unit a refundable core charge may apply.

Call 216-250-6666 with your VIN or tag number and we will confirm this listing fits. More 2.4L.

Additional information

Vendor SKU	DCEW
Block Casting	2995, 2782, 0428.
Crank Casting	183
Product Type	Engines
Displacement	2.4L
Number of Cylinders	4
Block Type	L

2011-2017 Chevy, GMC 2.4L Remanufactured Engine – Federal Emissions

Description

2011-2017 Chevrolet Buick GMC Ecotec 2.4L L4. Vin Code K Federal Emissions Only with no smog holes by exhaust manifold