BendPak XPR-12CL-LTA-192 12,000-lb. Capacity / ALI Certified Two-Post Lift / Clearfloor / Long-Reach Telescoping Arms/192″ Height
$12,195.00
The BendPak XPR-12CL-LTA-192 is a 12,000-lb. ALI Certified clearfloor four-post lift. Confirm your ceiling height, floor and power supply before ordering — we ship by freight and can check the install with you.
In Stock
Description
Shop the BendPak XPR-12CL-LTA-192 12,000-lb. Capacity / ALI Certified Two-Post Lift / Clearfloor / Long-Reach Telescoping Arms/192″ Height at Variety Engines — every unit is carefully inspected, warrantied, and ready to ship fast across the US.
Features & Specs
- 12,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Padded overhead safety shutoff bar
- Extended height top-beam provides greater overhead clearance
- Single-point safety release
- Dual direct-drive hydraulic cylinders
- Dual-synchro equalization system for equal lifting
- Oversized 53″ tall carriage for superior strength and durability
- Electric / hydraulic power system
- Oversized A36 steel base plates
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3″
- Plated arm restraints and arm pins for rust prevention
- Heavy-duty 1/2″ aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Durable, rubber lift pads with stackable adapters
- 16-piece specialty adapter set includes four 6″ stackable adapters, four 3″ stackable adapters, four polyurethane contact pads and four frame cradle pads
- Convenient storage is included for truck and van adapters
- Long-reach triple-telescoping arms provide increased range for lifting point access
Capacity
Lifting Capacity* 12,000 lbs. (5,443 kg)
*Max Capacity / Front Axle 6,000 lbs. (2,722 kg)
*Max Capacity / Rear Axle 6,000 lbs. (2,722 kg)
Rise
A – Rise: 69″ (1,753 mm)
B – Rise + Pad Only: 74″ (1,880 mm)
C – Rise + Pad + 63 mm Adapter: 80″ (2,032 mm)
D – Min. Height + Pad: 5″ (127 mm) Time to Full Rise: 45 seconds
Outside Dimensions
E – Height Overall: 192″ (4,318 mm)
F – Width Overall: 155″ (3,937 mm)
G – Outside Columns: 144″ (3,658 mm)
Inside Dimensions
H – Inside Columns: 120″ (3,048 mm)
I – Drive-Thru Clearance: 106″ (2,692 mm)
J – Floor To Overhead Switch: 165″ (4,191 mm)
Arms & Pads
K – Front Arm Reach: (MIN) 32″ (813 mm)
K – Front Arm Reach: (MAX) 60″ (1,524 mm)
L – Rear Arm Reach: (MIN) 32″ (813 mm)
L – Rear Arm Reach: (MAX) 60″ (1,524 mm)
Max Load Per Arm 3,000 lbs. (1,361 kg)
Shipping
Electrical: 220 VAC / 60 Hz / 1 Ph
Noise: 45 dB
About the BendPak XPR-12CL-LTA-192 12,000-lb. Capacity / ALI Certified Two-Post Lift / Clearfloor / Long-Reach Telescoping Arms/192″ Height
This unit is quality-tested and ready to install. Browse more Four Post Lifts, or contact our team with your VIN for fitment help — with fast, tracked shipping on every order.
Be the first to review “BendPak XPR-12CL-LTA-192 12,000-lb. Capacity / ALI Certified Two-Post Lift / Clearfloor / Long-Reach Telescoping Arms/192″ Height”
Reviews
There are no reviews yet.