MaxJax M7K Portable Two-Post Garage Lift – Deluxe Package
$4,760.00
The MaxJax M7K is a portable two-post car lift. Confirm your ceiling height, floor and power supply before ordering — we ship by freight and can check the install with you. Listed as: Deluxe Package.
Description
Features
Benefits of the MaxJax
An impressive lifting capacity is just the start of what sets the M7K apart from the competition. Its extensive list of features is there to make sure you get the most bang for your buck. Every MaxJax unit is loaded with the right features that make it the best choice when looking for a new car lift. Read through to check out everything this car lift has to offer, and you’ll easily come to the conclusion that the MaxJax is the real deal.
Clear undercar access
Want under-car clearance without having to rely on a permanent installation? That’s where MaxJax comes in! No other low-rise or mid-rise lift system provides more under-car clearance and unobstructed floor space than the MaxJax lifting system. Now you can easily access engine undersides as well as critical components like transmissions, drive-shafts, starters, differentials, or anything else that would require under-car access.
Portability
A two-post car lift with built-in wheels that allows you to use the lift when you need it, then conveniently store it out of the way when not in use keeping your garage and vehicle lanes clutter-free.
Stow to go in less than 15-minutes
Internally threaded recessed drop-in anchors and quick-connect/disconnect hydraulic couplers provide for fast and simple set-up. NOTICE: Before drilling into post-tension garage floors, always consult a building engineer for determining cable locations and where to avoid drilling.
Works like magic
A robust, gear-type flow divider is the heart of the MaxJax system, providing consistent, equalized lifting. The specially designed flow divider/combiner is a positive-displacement fluid control device which allows precise distribution of hydraulic power to both columns even if load balance or pressures change.
Mobile power unit cart
The great thing about our standard mobile power unit cart is that it’s small enough to be stored out of the way and it features a storage area for the hydraulic hoses. The hydraulic power unit uses a single-phase motor that requires 110-volts AC and a 23-amp breaker. The industrial grade power cord is 6-ft. long. A simple push-button switch raises the lift, and a push lever controls the lowering. Simple quick-disconnect hoses can be positioned easily for single or dual column operation.
Adjustable lifting arms and stackable adapters
Increases overall arm positioning for lifting a variety of different vehicles that have Uni-body construction, OEM recommended pick-up points, or wide and/or narrow frame configurations. Every MaxJax order includes four (4) medium height adapters and four (4) stackable standard lift pad adapters.
Low-profile arms
Fit under the lowest compact and sport vehicles or custom motorcycles with lowered frames.
Automatic arm restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear type arm restraints automatically disengage to provide easy positioning of the lift arms.
Maintenance-free slide blocks
Rather than using roller bearings that need constant lubrication and maintenance, we use futuristic full-floating UHMW ultra-high molecular weight polyethylene load bearings that never need lubrication and last virtually the life of the lift.
Single-piece columns
We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Direct-Drive technology
By utilizing two low-pressure HVLP Direct-Drive cylinders, we’ve eliminated the need for lifting chains or screw mechanisms most commonly found on other lift designs. HVLP Direct-Drive technology offers better reliability, smoother operation and less maintenance.
Industrial-grade hydraulic cylinders
Integrated into every MaxJax® hydraulic cylinder is a one-piece, pilot fitted, machined steel piston wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001″ diametrically, to ensure superior cylinder operation and life.
Two lifts in one
Our optional motorcycle adapter kit allows you to safely lift motorcycles, ATV’s or other motorized vehicles to a comfortable working height.
Specs
| Lifting Capacity | 7,000 lbs. (2,722 kg) |
|---|---|
| Max Load Per Arm | 1,750 lbs. (794 kg) |
| A Height Overall | 89.5″ (2,273 mm) |
| B Height of Column | 64″ (1,626 mm) |
| C Min. Pad Height | 5.5″ (139.7 mm) |
| D Max Lift Height (Pad Only) | 47.25″ (1200.15 mm) |
| E Max Lift Height (With 3″ Adapter) | 50.5″ (1,283 mm) |
| F Arm Reach (Min – Max) | 26″ – 40″ (660 mm – 1,016 mm) |
| G Typical Width (Outside of Base Plate) | 105″ – 135″ (2,667 mm – 3,429 mm) |
| H Drive-thru clearance | 74″ – 104″ (1,880 mm – 2,642 mm) |
| Locking Positions | 7 (every 3″) |
| Motor | VAC / 50-60 Hz. / 1 Ph. / 15 Amps |
| Time of full Rise | 45-seconds |
| Individual Column Weight | 300 lbs. (136 kg) |
| Shipping Weight (Standard Model) | 980 lbs. (444 kg) |
| Shipping Dimensions (Standard Model) | 68″ x 39″ x 35″ (1,727 mm x 990.6 mm x 889 mm) |
Call 216-250-6666 or email sales@varietyengines.com with your ceiling height, floor and power supply and we will check the install and freight with you before you order. More Two Post Lifts.
Related products
