NP242 Transfer Case for 1999-2001 Jeep Grand Cherokee
Model Number

NP242
Vendor SKU

RTC242J-7
Application Notes

Select-Trac, 23 Spline Front Input, 27 Spline Slip Rear, W/Rubber Boot, w/o Speedo Hole, Four Wire . ASSM# 52098875, 52098875ab, 52098875ac. 23 Spline 0.84 Inch Exposed Length On Input Shaft, Cup Style Front Output Yoke, 27 Exposed Spline Style Rear Output Shaft With Rubber Boot, 1.75 Inch Speedo Hole, 4 Pin Indicator Switch In Tail Housing, 1 Piece Tail Housing, Tag Numbers: 52098875, 52098875AB, 52098875AC, Hollander Number: 412-431, Other Numbers: UMT208-4
Product Type

Transfer Cases

NP242 Transfer Case for 1999-2001 Jeep Grand Cherokee

SKU: tc208-4
In Stock

Original price was: $1,299.00.Current price is: $1,199.00.

  • All units are quality inspected throughout the remanufacturing process to maintain our quality standard.
  • All cases are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
  • 100% replacement of seals, bearings, viscous couplers (when applicable) and other common wear components.
  • Units are shipped in high density plastic totes to help eliminate in-transit damage.

This fully remanufactured Transfer Case is backed by an available 7 year, 1 million mile warranty.

In Stock
Categories: ,

Description

Application Notes: NV242J; 23 Spline 0.84 Inch Exposed Length On Input Shaft, Cup Style Front Output Yoke, 27 Exposed Spline Style Rear Output Shaft With Rubber Boot, 1.75 Inch Speedo Hole, 4 Pin Indicator Switch In Tail Housing, 1 Piece Tail Housing, Tag Numbers: 52098875, 52098875AB, 52098875AC, Hollander Number: 412-431, Other Numbers: UMT208-4.

Remanufacturing Process

Every transfer case we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:

  • Deep Clean – To start the remanufacturing process, each transfer case is fully disassembled and cleaned
  • Inspection – Each transfer case is carefully inspected for cracks, excessive wear, shaft warp, and chain stretch
  • New Components – All seals, bearings, joints and rings are replaced as well as electrical components (solenoids and control units)
  • Validation – After reassembly, each individual transfer case is spin tested as part of a detailed checklist validation process

Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured transfer cases. Each transfer case comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other transfer case manufacturer comes close.

Additional information

Model Number

NP242
Vendor SKU

RTC242J-7
Application Notes

Select-Trac, 23 Spline Front Input, 27 Spline Slip Rear, W/Rubber Boot, w/o Speedo Hole, Four Wire . ASSM# 52098875, 52098875ab, 52098875ac. 23 Spline 0.84 Inch Exposed Length On Input Shaft, Cup Style Front Output Yoke, 27 Exposed Spline Style Rear Output Shaft With Rubber Boot, 1.75 Inch Speedo Hole, 4 Pin Indicator Switch In Tail Housing, 1 Piece Tail Housing, Tag Numbers: 52098875, 52098875AB, 52098875AC, Hollander Number: 412-431, Other Numbers: UMT208-4
Product Type

Transfer Cases